Nortel Accelar 8006 Installation Manual
Nortel Accelar 8006 Installation Manual

Nortel Accelar 8006 Installation Manual

Chassis fan tray
Hide thumbs Also See for Accelar 8006:

Advertisement

Installing the
Passport 8006
Chassis Fan Tray
Part No. 208290-B
April 2000
4401 Great America Parkway
Santa Clara, CA 95054

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Accelar 8006 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nortel Accelar 8006

  • Page 1 Installing the Passport 8006 Chassis Fan Tray Part No. 208290-B April 2000 4401 Great America Parkway Santa Clara, CA 95054...
  • Page 2 In the interest of improving internal design, operational function, and/or reliability, Nortel Networks NA Inc. reserves the right to make changes to the products described in this document without notice. Nortel Networks NA Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
  • Page 3: About This Guide

    About This Guide This guide provides instructions for replacing a fan tray in the Passport information about the chassis, refer to Installing the Passport 8006 Chassis (part number 207313-B). You can replace a fan tray without turning off power to the chassis. To maintain proper cooling of the chassis, be sure to install the replacement fan immediately.
  • Page 4 Slide the new fan tray into the chassis and tighten the retaining screws. 9591FA When the chassis power is on, verify that the green status LED is lit. 9592FA...

This manual is also suitable for:

Passport 8006

Table of Contents