74 Switch operations
3
4
5
6
7
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
CAUTION
Risk of data loss
You must remove the card from the 8691 SF/CPU module
or the 8692 SF/CPU module before you change the
read-write protection. Failure to remove the card can
result in improper write protection.
Locate the read-write protect switch on the edge opposite the arrow
on the memory card.
For information about the location of the read-write protect switch,
see
"Memory card read-write protect switch" (page
Memory card read-write protect switch
Adjust the read-write protect switch.
To reinsert the card, position the card with the label facing to the left
and the insert arrow pointing toward the card receptacle.
Insert the card into the card receptacle.
Gently push in the card until it fits tightly in place.
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008
—End—
74).