Introduction
The Nortel Ethernet Routing Switch 8600 chassis provides the physical
framework for the Nortel Ethernet Routing Switch 8600 modules.
This document provides the instructions to install the Nortel Ethernet
Routing Switch 8600 chassis in an equipment rack. This document also
describes some of the routine tasks to operate the Nortel Ethernet Routing
Switch 8600 and includes technical specifications for the chassis and
modules.
Prerequisites
•
Navigation
•
•
•
•
•
•
•
•
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
Before you install the Nortel Ethernet Routing Switch 8600 chassis,
ensure that you install all network wiring on the premises by using
standard cable-system practices.
"Chassis installation fundamentals" (page 17)
"8010, 8006, and 8003 chassis installation" (page 37)
"8010co chassis installation" (page 49)
"Switch operations" (page 67)
"Troubleshooting" (page 75)
"Common procedures" (page 81)
"Part numbers" (page 83)
"Technical specifications" (page 85)
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008
9