Nortel Passport 8000 Series Installing And Maintaining
  1. Manuals
  2. Brands
  3. Nortel Manuals
  4. Chassis
  5. Passport 8000 Series
  6. Installing and maintaining
Nortel Passport 8000 Series Installing And Maintaining

Nortel Passport 8000 Series Installing And Maintaining

Hide thumbs Also See for Passport 8000 Series:
Table of Contents

Advertisement

Quick Links

Installing and Maintaining the
Passport 8000 Series Chassis
*316314-E_Rev_01*
Part No. 316314-E Rev 01
March 2006
4655 Great America Parkway
Santa Clara, CA 95054

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Passport 8000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nortel Passport 8000 Series

Summary of Contents for Nortel Passport 8000 Series

  • Page 1 Part No. 316314-E Rev 01 March 2006 4655 Great America Parkway Santa Clara, CA 95054 Installing and Maintaining the Passport 8000 Series Chassis *316314-E_Rev_01*...
  • Page 2 In the interest of improving internal design, operational function, and/or reliability, Nortel Networks Inc. reserves the right to make changes to the products described in this document without notice. Nortel Networks Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
  • Page 3 CE marking statement (Europe only) EN 55 022 statements This is to certify that the Nortel Networks 8000 Series chassis and components installed within the chassis are shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC.
  • Page 4 BSMI statement for 8010, 8006 and 8003 chassis (Taiwan only) This is a Class A product based on the standard of the Bureau of Standards, Metrology and Inspection (BSMI) CNS 13438, Class A. MIC notice for 8010, 8006, 8003 chassis (Republic of Korea only) This device has been approved for use in Business applications only per the Class A requirements of the Republic of Korea Ministry of Information and Communications (MIC).
  • Page 5 EN 60 950 statement This is to certify that the Nortel Networks 8000 Series chassis and components installed within the chassis are in compliance with the requirements of EN 60 950 in accordance with the Low Voltage Directive. Additional national differences for all European Union countries have been evaluated for compliance.
  • Page 6 Norma Oficial Méxicana (NOM): Exportador: Nortel Networks, Inc. 4655 Great America Parkway Santa Clara, CA 95054 USA Importador: Nortel Networks de México, S.A. de C.V. Avenida Insurgentes Sur #1605 Piso 30, Oficina Col. San Jose Insurgentes Deleg-Benito Juarez México D.F. 03900...
  • Page 7 30 days of purchase to obtain a credit for the full purchase price. “Software” is owned or licensed by Nortel Networks, its parent or one of its subsidiaries or affiliates, and is copyrighted and licensed, not sold. Software consists of machine-readable instructions, its components, data, audio-visual content (such as images, text, recordings or pictures) and related licensed materials including all whole or partial copies.
  • Page 8 (for DoD entities). Customer may terminate the license at any time. Nortel Networks may terminate the license if Customer fails to comply with the terms and conditions of this license. In either event, upon termination, Customer must either return the Software to Nortel Networks or certify its destruction.
  • Page 9 Revision history March 2006 CR Q01300584: Change in documentation: Removed Pressing the Reset button causes a warm restart. Added the following Note: Pressing the Reset button causes a cold restart.

  • Page 11: Table Of Contents

    Chapter 1 Passport 8000 Series chassis hardware components ....23 8010co chassis ............24 8010 chassis .
  • Page 12 Resetting the Passport 8000 Series switch ....... . . 82...
  • Page 13 Appendix A Technical specifications for the Passport 8000 Series Chassis ..95 Model 8003AC power supply ..........96 AC input power specifications .
  • Page 14 14 Contents Input power consumption example: 8006 chassis ......104 8005AC power supply example ........104 8005DC power supply example .
  • Page 15 Securing the cable guide to the chassis: 8006 chassis ....51 Figure 27 Securing the cable guide to the chassis: 8003 chassis ....52 Installing and Maintaining the Passport 8000 Series Chassis...
  • Page 16 Figures Figure 28 Accessories in the 8010co chassis shipping container ....55 Figure 29 Two 8010co chassis with BIP in a two-post rack ....60 Figure 30 Installing the installation shelf in a 19-inch equipment rack .
  • Page 17 8005DC power supply example ....... 105 Installing and Maintaining the Passport 8000 Series Chassis...
  • Page 18 Tables 316314-E Rev 01...

  • Page 19: Preface

    This guide is intended for qualified service personnel who are installing a Passport 8000 Series switch in a Passport 8000 Series chassis for the first time or who need to install or replace any Passport 8000 Series customer-replaceable unit (CRU) in the chassis.

  • Page 20: Text Conventions

    Hard-copy technical manuals You can print selected technical manuals and release notes free, directly from the Internet. Go to the www.nortel.com/documentation URL. Find the product for which you need documentation. Then locate the specific category and model or version for your hardware or software product. Use Adobe* Acrobat Reader* to open the manuals and release notes, search for the sections you need, and print them on most standard printers.

  • Page 21: How To Get Help

    Preface 21 How to get help If you purchased a service contract for your Nortel Networks product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller for assistance. If you purchased a Nortel Networks service program, contact Nortel Networks Technical Support.
  • Page 22 Preface 316314-E Rev 01...

  • Page 23: Passport 8000 Series Chassis Hardware Components

    Passport 8000 Series chassis hardware components Each Passport 8000 Series chassis consists of a sheet metal enclosure, a backplane, and a power backplane. The number of bays for power supplies and the number of fan trays depends on the chassis type.

  • Page 24: 8010Co Chassis

    8692SF switch fabric modules. Slots are numbered from left to right. You can install Passport 8600 interface modules in slots 1 through 4 and slots 7 through 10. Slots 5 and 6 are reserved for Passport 8000 Series switch fabric modules. For complete information about Passport 8600 modules and instructions for installing them, see Installing Passport 8600 Switch Modules (312749-J).

  • Page 25: Figure 1 8010Co Chassis And Components

    Chapter 1 Passport 8000 Series chassis hardware components 25 For complete information about the Passport power supplies and instructions for installing them, see Installing an AC Power Supply in a Passport 8000 Series Chassis (312751-D) or Installing a DC Power Supply in a Passport 8000 Series Chassis (313070-D).

  • Page 26: 8010 Chassis

    Note: The 8001AC and 8002DC power supplies have not been tested with Passport 8600 modules released since Passport 8600 Release 3.7. Therefore, Nortel Networks recommends that you use the 8004 or 8005 power supply with these modules. 316314-E Rev 01...
  • Page 27 Upgrade the power supplies before upgrading the modules. For complete information about the Passport power supplies and instructions for installing them, see Installing an AC Power Supply in a Passport 8000 Series Chassis (312751-D) or Installing a DC Power Supply in a Passport 8000 Series Chassis (313070-D).

  • Page 28: 8006 Chassis

    8691SF or 8692SF switch fabric modules. The top four slots allow you to install 8600 interface modules. Slots 5 and 6 are reserved for Passport 8000 Series switch fabric modules. For complete information about Passport 8600 modules and instructions for installing them, see Installing Passport 8600 Switch Modules (312749-J).
  • Page 29 Caution: The 8004 and 8005 power supplies have different power ratings. Therefore, Nortel Networks recommends that you do not operate the Passport 8000 Series chassis with a mix of power supply models (8004, and 8005). If you are upgrading the Passport 8600 switch and have a redundant power configuration, you can hot-swap the 8004 power supply with the 8005 power supply while the Passport 8000 system remains in operation.

  • Page 30: 8003 Chassis

    30 Chapter 1 Passport 8000 Series chassis hardware components For complete information about the Passport power supplies and instructions for installing them, see Installing an AC Power Supply in a Passport 8000 Series Chassis (312751-D) or Installing a DC Power Supply in a Passport 8000 Series Chassis (313070-D).

  • Page 31: Power Supplies

    The 8003 chassis has two bays for 8003AC power supplies (refer to Installing an AC Power Supply in a Passport 8000 Series Chassis (312751-D), and a single 8003 fan tray for cooling (refer to Installing a Fan Tray in an 8000 Series Switch (312752-D).
  • Page 32 Caution: The 8004 and 8005 power supplies have different power ratings. Therefore, Nortel Networks recommends that you do not operate the Passport 8000 Series chassis with a mix of power supply models (8004, and 8005). If you are upgrading the Passport 8600 switch and have a redundant power configuration, you can hot-swap the 8004 power supply with the 8005 power supply while the Passport 8000 system remains in operation.

  • Page 33: Fan Trays

    Chapter 1 Passport 8000 Series chassis hardware components 33 For complete information about the power supplies and instructions for installing them, see Installing an AC Power Supply in a Passport 8000 Series Chassis (312751-D), and Installing a DC Power Supply in a Passport 8000 Series Chassis (313070-D).
  • Page 34 34 Chapter 1 Passport 8000 Series chassis hardware components 316314-E Rev 01...

  • Page 35: Installing The 8010, 8006, And 8003 Chassis

    You have the cables, tools, and other equipment that you need. • Your installation site meets the physical, electrical, and environmental requirements described in “Site requirements” on page The sections that follow provide information to help you prepare for installation. Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 36: Shipment Contents

    36 Chapter 2 Installing the 8010, 8006, and 8003 chassis Shipment contents Inspect all items for shipping damage. If you detect any damage, do not install the chassis. Call the Nortel Networks Technical Solutions Center in your area (see “How to get help” on page 21.) In addition to the 8010, 8006 or 8003 chassis, your shipping container contains several hardware accessories.

  • Page 37: Figure 5 Items In The 8010 Chassis Shipping Container

    1 = Cable adapter 2 = Rack mounting brackets 3 = Console cable 4 = Screws (x14) for brackets 5 = Screws (x24) for equipment rack 6 = Cable guides 7 = Rubber footpads 9073FB Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 38: Figure 6 Items In The 8006 Chassis Shipping Container

    38 Chapter 2 Installing the 8010, 8006, and 8003 chassis Figure 6 Items in the 8006 chassis shipping container Rubber footpads 1 = Cable adapter 2 = Rack mounting brackets 3 = Console cable 4 = Screws (x10) for brackets 5 = Screws (x10) for equipment rack 6 = Cable guide 7 = Rubber footpads...

  • Page 39: Supplying Equipment

    PC, laptop, VT-100 console or equivalent, such as a PC terminal emulator. Or, you can attach an AT-compatible modem to allow dial-in access to startup configuration and diagnostics. Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 40: Cables

    Ensure that the installation site meets the space, electrical, and environmental requirements listed in this section. See Appendix A, “Technical specifications for the Passport 8000 Series Chassis,” on page 95 for more information. Space requirements The installation site must provide sufficient free space around the chassis to ensure proper ventilation and access for servicing.

  • Page 41: Ac Input Electrical Requirements (8010, 8006 And 8003 Chassis)

    The installation site must meet the following electrical requirements for DC power (Table 3). For additional electrical requirements, see Appendix A, “Technical specifications for the Passport 8000 Series Chassis,” on page Table 3 Electrical requirements for the DC models Nominal Input DC power supply Input current...

  • Page 42: Positioning The 8010, 8006, And 8003 Chassis On A Flat Surface

    42 Chapter 2 Installing the 8010, 8006, and 8003 chassis To make the chassis lighter to install, you can do the following: • Remove the power supply filler panels (see “Removing and Installing a Power Filler Panel” in Installing an AC Power Supply in an 8000 Series Switch (312751-D) or Installing a DC Power Supply in an 8000 Series Switch (313070-D).

  • Page 43: Mounting The 8010, 8006, And 8003 Chassis In An Equipment Rack

    7-foot rack. Table 6 Maximum number of chassis in 7-foot rack Maximum number of Chassis chassis installed in 7-foot rack 8010 8006 8003 To install the chassis in a 19-inch equipment rack: Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 44: Figure 8 Positioning The Rack-Mounting Brackets: 8010 Chassis

    44 Chapter 2 Installing the 8010, 8006, and 8003 chassis Hold each rack-mounting bracket against one side of the chassis. Make sure that the attachment holes in the bracket match the holes in the chassis (Figure Figure 9, and Figure 10 on page 45).

  • Page 45: Figure 10 Positioning The Rack-Mounting Brackets: 8003 Chassis

    Figure 12, and Figure 13 on page 46). Figure 11 Attaching the rack-mounting brackets to the chassis: 8010 chassis 9104FA Figure 12 Attaching the rack-mounting brackets to the chassis: 8006 chassis 9418FA Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 46: Figure 13 Attaching The Rack-Mounting Brackets To The Chassis: 8003 Chassis

    46 Chapter 2 Installing the 8010, 8006, and 8003 chassis Figure 13 Attaching the rack-mounting brackets to the chassis: 8003 chassis 10237FA Measure the appropriate number of rack units of free vertical space inside the rack and mark the spot (Table Table 7 Number of rack units to allocate for chassis Chassis...

  • Page 47: Figure 14 Aligning The Rack-Mounting Brackets With The Equipment Rack

    Figure 14 Aligning the rack-mounting brackets with the equipment rack: 8010 chassis 9074FA Figure 15 Aligning the rack-mounting brackets with the equipment rack: 8006 chassis 9419FA Figure 16 Aligning the rack-mounting brackets with the equipment rack: 8003 chassis 10238FA Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 48: Figure 17 Installing The 8010 Chassis In An Equipment Rack

    48 Chapter 2 Installing the 8010, 8006, and 8003 chassis Insert and tighten the rack-mounting screws with a Phillips screwdriver (Figure Figure 18, and Figure 19 on page 49). Figure 17 Installing the 8010 chassis in an equipment rack 9075FA Figure 18 Installing the 8006 chassis in an equipment rack 9420FA 316314-E Rev 01...

  • Page 49: Installing The Cable Guides

    Loosen, but do not remove, the rack-mounting screws needed to install one cable guide (Figure Figure 21 on page 50 Figure 22 on page 50). Figure 20 Loosening the rack-mounting screws: 8010 chassis 9105FA Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 50: Figure 21 Loosening The Rack-Mounting Screws: 8006 Chassis

    50 Chapter 2 Installing the 8010, 8006, and 8003 chassis Figure 21 Loosening the rack-mounting screws: 8006 chassis 9421FA Figure 22 Loosening the rack-mounting screws: 8003 chassis 10245FA Slide the guide onto the loosened screws (Figure Figure 24 on page 51).

  • Page 51: Figure 24 Sliding The Cable Guide Onto The Screws: 8003 Chassis

    Tighten the screws to secure the guide to the chassis (Figure Figure Figure 27 on page 52). Figure 25 Securing the cable guide to the chassis: 8010 chassis 9107FA Figure 26 Securing the cable guide to the chassis: 8006 chassis 9422FA Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 52: Figure 27 Securing The Cable Guide To The Chassis: 8003 Chassis

    52 Chapter 2 Installing the 8010, 8006, and 8003 chassis Figure 27 Securing the cable guide to the chassis: 8003 chassis 10247FA 316314-E Rev 01...

  • Page 53: Installing The 8010Co Chassis

    You have the cables, tools, and other equipment that you need. • Your installation site meets the physical, electrical, and environmental requirements. The sections that follow provide information to help you prepare for installation. Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 54: Shipment Contents

    54 Chapter 3 Installing the 8010co chassis Shipment contents Inspect all items for shipping damage. If you detect any damage, do not install the 8010co chassis. Call the Nortel Networks Technical Solutions Center in your area (see “How to get help” on page 21).

  • Page 55: Figure 28 Accessories In The 8010Co Chassis Shipping Container

    7 = Side cable management brackets (x 2) standard 19-inch rack (x 16) 8 = Antistatic wrist strap 9 = Hex nuts for mounting installation shelf in a standard 19-inch rack (x4) 10452FB Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 56: Supplying Equipment

    56 Chapter 3 Installing the 8010co chassis Supplying equipment You might need items that are not included in the 8010co chassis accessory package. Before installing the 8010co hardware, ensure that you have all the cables, tools, and other equipment that you need. Cables Unless you specifically ordered them, the cables required for your network configuration are not included in the 8010co chassis accessory package.

  • Page 57: Site Requirements

    Refer to the power specifications for the power supply in Appendix A, “Technical specifications for the Passport 8000 Series Chassis,” on page DC input electrical requirements If you are installing a BIP, the installation site must meet the following electrical...

  • Page 58: Environmental Requirements

    58 Chapter 3 Installing the 8010co chassis Environmental requirements The installation site must meet the following environmental requirements (Table 10). Table 10 Environmental requirements Environmental specifications Operating temperature: -5° to 55° C (23° to 131° F) Storage temperature: -40° to 70° C (-40° to 158° F) Operating humidity: Storage humidity: 92.5%...

  • Page 59: Mounting The 8010Co Chassis In A Two-Post Rack

    In a 7-foot two-post rack, you can install two 8010co chassis platforms and a BIP. Figure 29 on page 60 shows two 8010co chassis with a BIP installed in a two-post rack. Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 60: Figure 29 Two 8010Co Chassis With Bip In A Two-Post Rack

    60 Chapter 3 Installing the 8010co chassis Figure 29 Two 8010co chassis with BIP in a two-post rack 1 = Breaker interface panel 2 = 8010co Chassis (upper shelf position) 3 = 8010co Chassis (lower shelf position) 10404EC 316314-E Rev 01...

  • Page 61: Mounting The 8010Co Chassis In A 19-Inch Rack

    (Figure 31 on page 63). Make sure that the hole pairs on either side of the vertical support match horizontally. 10 Tighten each screw with a Phillips screwdriver. Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 62: Figure 30 Installing The Installation Shelf In A 19-Inch Equipment Rack

    62 Chapter 3 Installing the 8010co chassis Figure 30 Installing the installation shelf in a 19-inch equipment rack 1 = Phillips head screws (x4) 2 = Standard 19-inch equipment rack 3 = Nuts (x4) 4 = Installation shelf 10403FB 316314-E Rev 01...

  • Page 63: Figure 31 Installing The 8010Co Chassis In A 19-Inch Two-Post Rack

    Chapter 3 Installing the 8010co chassis 63 Figure 31 Installing the 8010co chassis in a 19-inch two-post rack Fa il Pa ss Fa il Pa ss 10225FA Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 64: Mounting The 8010Co Chassis In A Hendry Rack

    64 Chapter 3 Installing the 8010co chassis Mounting the 8010co chassis in a Hendry rack To install the 8010co chassis in a Hendry rack: Place the installation shelf at the bottom of the rack. Holding the installation shelf in position, align the shelf’s mounting rail with two holes on each side of the vertical rack support.

  • Page 65: Figure 33 Removing The Mounting Rails From The 8010Co Chassis

    Chapter 3 Installing the 8010co chassis 65 Figure 33 Removing the mounting rails from the 8010co chassis Fa il Pa ss Fa il Pa ss 10417FA Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 66: Figure 34 Installing The Mounting Rails For A Hendry Rack

    66 Chapter 3 Installing the 8010co chassis Using the 10 screws that you removed from the two mounting rails, reinstall the mounting rails as shown in Figure Figure 34 Installing the mounting rails for a Hendry rack Fa il Pa ss Fa il Pa ss 10418FA...

  • Page 67: Installing The Cable Management Brackets

    68). To install the two side cable management brackets: Align the slots on the side bracket with the rods in the chassis (Figure 35 on page 68). Push the bracket into place. Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 68: Figure 35 Installing Cable Management Brackets

    68 Chapter 3 Installing the 8010co chassis Figure 35 Installing cable management brackets Fa il Pa ss Fa il Pa ss 1 = Top cable management bracket 2 = Side cable management brackets (x2) 10217FB 316314-E Rev 01...

  • Page 69: Grounding The 8010Co Chassis

    Chapter 3 Installing the 8010co chassis 69 Grounding the 8010co chassis Before you connect power cables or network cables to your switch, Nortel Networks recommends that you ground the 8010co chassis. Figure 36 shows the location of the ground studs on the 8010co chassis rear panel.
  • Page 70 70 Chapter 3 Installing the 8010co chassis To attach a ground to one of the chassis grounding studs, you need the following: • One single-hole cable lug that fits over one of the grounding studs • Nut and a locking washer for the grounding stud. •...

  • Page 71: Figure 37 Chassis And 8004Dc Power Supply Grounding Example

    Gnd PS 2 lower Gnd PS 3 lower + DC + DC + DC + DC Gnd lower shelf – DC – DC – DC – DC Legend: = Chassis ground = Earth ground 10761EA Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 72: Table 11 Item Description For Chassis And 8004Dc Power Supply Grounding

    72 Chapter 3 Installing the 8010co chassis Table 11 Item description for chassis and 8004DC power supply grounding Item Description Cabinet frame or equipment rack AWG#6 ground lead (provided with BIP) Upper shelf chassis ground stud. Upper shelf ground lead (not provided). Upper shelf power supply ground leads x 3.

  • Page 73: Figure 38 Chassis And Ac Power Supply Grounding Example

    Figure 38 Chassis and AC power supply grounding example Upper shelf PS 1 PS 2 PS 3 Lower shelf PS 1 PS 2 PS 3 Legend: = Chassis ground = Earth ground 10759FA Installing and Maintaining the Passport 8000 Series Chassis...

  • Page 74: Table 12 Item Description For Chassis And Ac Power Supply Grounding

    74 Chapter 3 Installing the 8010co chassis Table 12 Item description for chassis and AC power supply grounding Item Description Cabinet frame or equipment rack Upper shelf chassis ground stud Upper shelf ground leads (not provided) Lower shelf chassis ground stud Upper shelf ground leads (not provided) AC equipment ground (ACEG) leads within individual lower shelf cords (x 3)

  • Page 75: Connecting The Ground Cables To The Rack Grounding Strip

    Use a 7/16-inch hex wrench to fasten the hardware in the correct order. Figure 39 Rack grounding strip example 1 = Hex head bolt 3 = Ground crimp lug 2 = Lock washer 4 = Rack grounding strip 10433FA Installing and Maintaining the Passport 8000 Series Chassis...
  • Page 76 76 Chapter 3 Installing the 8010co chassis 316314-E Rev 01...

  • Page 77: Operating The Passport 8000 Series Switch

    Series switch and provides troubleshooting information. It includes the following topics: Topic Page Turning the Passport 8000 Series switch on and off Verifying a successful installation Configuring the chassis to operate in default, M, or R mode Resetting the Passport 8000 Series switch...

  • Page 78: Turning The Passport 8000 Series Switch On And Off

    78 Chapter 4 Operating the Passport 8000 Series switch Turning the Passport 8000 Series switch on and off If the Passport 8000 Series chassis has one or more DC power supplies, go to the next section, “Turning DC power supplies on and off.”...

  • Page 79: Figure 40 Dc Power Supply Power Switch

    Note: The fan tray red fail LED may light briefly while the fans are powering to operational speed. After you turn on the Passport 8000 Series switch, each module automatically initiates a diagnostic test to verify proper module function (see “Verifying a...

  • Page 80: Turning Ac Power Supplies On And Off

    Turn the power switch on each power supply to the on position. If the problem persists, contact the Nortel Networks Technical Solutions Center. To turn off a Passport 8000 Series switch with a DC power source: Turn the power switch on each power supply to the off position (see...

  • Page 81: Verifying A Successful Installation

    Verifying a successful installation In a normal power-up sequence, the LEDs light as follows: When power is applied to the Passport 8000 Series switch, the green LED on each power supply and fan tray turns on, and the Online LED for each module lights amber.

  • Page 82: Configuring The Chassis To Operate In Default, M, Or R Mode

    82 Chapter 4 Operating the Passport 8000 Series switch Configuring the chassis to operate in default, M, or R mode The Passport 8600 system has three hardware operating modes: • Default mode (32,000 table entries) supports up to 32,000 hardware records.

  • Page 83: Installing Removable Flash Memory Cards

    Chapter 4 Operating the Passport 8000 Series switch 83 Figure 41 shows the location of the Reset button. Figure 41 Reset button Console Modem (DTE) Management Link PCMCIA Utilization % Reset DCE|DTE Power Supply Master Temp Online Reset button OPT0010A...

  • Page 84: Figure 42 Inserting A Removable Flash Memory Card: 8010Co Chassis

    84 Chapter 4 Operating the Passport 8000 Series switch Figure 42 Inserting a removable flash memory card: 8010co chassis BAC0030A Figure 43 Inserting a removable flash memory card: 8010, 8006, and 8003 chassis PPOC0021A Insert the card into the card receptacle.

  • Page 85: Removing Removable Flash Memory Cards

    Chapter 4 Operating the Passport 8000 Series switch 85 Removing removable flash memory cards To remove removable flash memory cards from the 8691SF CPU Module, or the 8692SF CPU Module: Press the eject button above the memory card receptacle on the 8691SF CPU...

  • Page 86: Protecting Memory Card Files

    Note: You typically do not operate a Passport 8000 Series switch with a write-protected memory card. You should make a copy of your configuration on another memory card, write-protect that card, and store it in a safe place.

  • Page 87: Replacing An Air Filter (8010Co Chassis Only)

    Chapter 4 Operating the Passport 8000 Series switch 87 b Pull the card out of the card receptacle. Caution: You must remove the card from the Passport 8000 Series chassis before changing the read-write protection. Failure to remove the card may result in improper write protection.

  • Page 88: Removing And Inserting An Air Filter (8010Co Chassis Only)

    Depth 46.27 cm (18.22 in.) Nortel Networks recommends that you replace the air filter every three months. After you install the first 8010co chassis at your site, inspect the air filter monthly until you can establish an average period of replacement.

  • Page 89: Figure 47 Inserting An Air Filter Into The 8010Co Chassis

    Chapter 4 Operating the Passport 8000 Series switch 89 Remove the installed air filter from its housing and set it aside. If dust is visible on it, move it to another area to prevent dust re-contamination. Hold the new filter by its short sides with the airflow indicator pointing up and...

  • Page 90: Troubleshooting

    90 Chapter 4 Operating the Passport 8000 Series switch Troubleshooting The following sections provide troubleshooting information for some of the more common problems that you may encounter with the Passport 8000 Series switch. Topic Page LED indications of problems Apparent module failure...

  • Page 91: Apparent Module Failure

    Chapter 4 Operating the Passport 8000 Series switch 91 Table 14 LED problem indicators (continued) Symptom Probable cause Corrective action The Master LED on a The module has detected a Replace the module; make sure that it is in the...

  • Page 92: Module Failure Work Around 2

    Remove the faulty module. Insert a new module. Reboot the chassis. If the module still fails to operate, contact the Nortel Networks Technical Solutions Center for assistance. Failure to get a login prompt from the Console port If you connect a terminal to the Console port of the 8691SF CPU Module, or 8692SF CPU Module and you fail to get a login prompt, the port may have an incorrect DCE/DTE setting.

  • Page 93: Cable Connection Problems

    Cabling for 10BASE-T networks can consist of two-pair Category 3, 4, or 5 unshielded twisted pair (UTP) wiring. However, to prepare for future upgrades to Fast Ethernet, Nortel Networks strongly recommends that you use all Category 5 cable in your network.

  • Page 94: Gbic Cables

    94 Chapter 4 Operating the Passport 8000 Series switch GBIC cables Cables for the GBICs vary depending on the specific GBIC type. For information about the cable requirements for GBICs, see Installing SFP and XFP Transceivers and GBICs (318034-C). 316314-E Rev 01...

  • Page 95: Technical Specifications For The Passport 8000 Series Chassis

    Appendix A Technical specifications for the Passport 8000 Series Chassis This appendix lists the specifications for the Passport 8000 Series Chassis and includes the following topics: This appendix includes the following topics: Topic Page Model 8003AC power supply Model 8004AC power supply...

  • Page 96: Model 8003Ac Power Supply

    96 Appendix A Technical specifications for the Passport 8000 Series Chassis Model 8003AC power supply This section provides power ratings for the 8003AC power supply and includes the following topics: • AC input power specifications • DC output power specifications...

  • Page 97: Model 8004Ac Power Supply

    Appendix A Technical specifications for the Passport 8000 Series Chassis 97 Model 8004AC power supply This section provides power ratings for the 8004AC power supply and includes the following topics: • AC input power specifications • DC output power specifications...

  • Page 98: Model 8005Ac Power Supply

    98 Appendix A Technical specifications for the Passport 8000 Series Chassis Model 8005AC power supply This section provides power ratings for the 8005AC power supply and includes the following topics: • AC input power specifications • DC output power specifications...

  • Page 99: Model 8004Dc Power Supply

    Appendix A Technical specifications for the Passport 8000 Series Chassis 99 Model 8004DC power supply This section provides power ratings for the 8004DC power supply and includes the following topics: • DC input power specifications • DC output power specifications...

  • Page 100: Model 8005Dc Power Supply

    100 Appendix A Technical specifications for the Passport 8000 Series Chassis Model 8005DC power supply This section provides power ratings for the 8005DC power supply and includes the following topics: • DC input power specifications • DC output power specifications...

  • Page 101: Passport 8600 Component Input Power

    Appendix A Technical specifications for the Passport 8000 Series Chassis 101 Passport 8600 component input power Table 15 provides input power specifications for Passport 8600 components. Table 15 Passport 8600 components input power Total input power 3.3 V power 12 V power...

  • Page 102: Input Power Consumption Example: 8010 Chassis

    102 Appendix A Technical specifications for the Passport 8000 Series Chassis Input power consumption example: 8010 chassis Table 16 shows the total module input power consumption for a sample 8010 chassis configuration. Table 16 Input power consumption sample configuration: 8010 chassis Total input power 3.3 V power...

  • Page 103: 8004Ac Power Supply Example

    Appendix A Technical specifications for the Passport 8000 Series Chassis 103 8004AC power supply example Table 17 shows at 200-240 VAC, you would need two 8004AC power supplies to support the configuration shown in Table 16. The third 8004AC power supply provides redundancy.

  • Page 104: Input Power Consumption Example: 8006 Chassis

    104 Appendix A Technical specifications for the Passport 8000 Series Chassis Input power consumption example: 8006 chassis Table 19 shows the total module input power-consumption for a sample 8006 chassis configuration. Table 19 Input power-consumption sample configuration: 8006 chassis Total input power 3.3 V power...

  • Page 105: 8005Dc Power Supply Example

    Appendix A Technical specifications for the Passport 8000 Series Chassis 105 Table 21 shows at 200-240 VAC, you would need one 8005AC power supply to support the configuration shown in Table 19. The second 8005AC power supply provides redundancy. Table 21 8005AC power supply example at 200-240VAC...
  • Page 106 106 Appendix A Technical specifications for the Passport 8000 Series Chassis Note: The 8001AC and 8002DC power supplies have not been tested with Passport 8600 modules released since Passport 8600 Release 3.7. Therefore, Nortel Networks recommends that you use the 8004 or 8005 power supply with these modules.

  • Page 107: 8010Co Chassis

    Appendix A Technical specifications for the Passport 8000 Series Chassis 107 8010co chassis This section provides physical, environmental, and electrical specifications for the 8010co Chassis and includes the following topics: • “Physical specifications,” next • “Network Equipment Building Standard” on page 107 •...

  • Page 108: Environmental Specifications

    108 Appendix A Technical specifications for the Passport 8000 Series Chassis Environmental specifications The following environmental specifications apply to the 8010co chassis: Specification Parameter Operating temperature: -5° to 55° C (23° to 131° F) Storage temperature: -40° to 70° C (-40° to 158° F)

  • Page 109: Electromagnetic Immunity

    Appendix A Technical specifications for the Passport 8000 Series Chassis 109 Parameter (continued) Specification (continued) Canada: ICES-003, Issue-2, Class A Europe: EN 55022-1998 Class A; EN 61000-3-2/A14, EN 61000-3-3 (CE Marking) Australia/New Zealand: AS/NZS 3548:1995, Class A Japan: VCCI-V3/97.04, Class A...

  • Page 110: Physical Specifications

    110 Appendix A Technical specifications for the Passport 8000 Series Chassis Physical specifications The following physical specifications apply to the 8010 chassis: Parameter Specification Height: 22.9 in. (58.2 cm) Width: 17.5 in. (44.5 cm) Depth: 19.9 in. (50.5 cm) Weight (empty):...

  • Page 111: International Regulatory Requirements

    Appendix A Technical specifications for the Passport 8000 Series Chassis 111 International regulatory requirements The 8010 chassis conforms to the following international regulatory requirements: • “Electromagnetic emissions,” next • “Electromagnetic immunity” on page 111 • “Safety agency certification” on page 112...

  • Page 112: Safety Agency Certification

    112 Appendix A Technical specifications for the Passport 8000 Series Chassis Safety agency certification The 8010 chassis conforms to the following safety agency standards: Parameter Specification Global basis for certification: IEC 60950 current edition with all CB member deviations UL60950 Canada: CSA 22.2 No.

  • Page 113: Environmental Specifications

    Appendix A Technical specifications for the Passport 8000 Series Chassis 113 Parameter (continued) Specification (continued) (continued) Fans: 6 per fan tray Thermal sensors: 1 per fan tray Environmental specifications The following environmental specifications apply to the 8006 chassis: Parameter Specification Operating temperature: 0°...

  • Page 114: Electromagnetic Immunity

    114 Appendix A Technical specifications for the Passport 8000 Series Chassis Specification (continued) Parameter (continued) Canada: ICES-003, Issue-2, Class A Europe: EN 55022-1998 Class A; EN 61000-3-2/A14, EN 61000-3-3 (CE Marking) Australia/New Zealand: AS/NZS 3548:1995, Class A Japan: VCCI-V3/97.04, Class A...

  • Page 115: 8003 Chassis

    Appendix A Technical specifications for the Passport 8000 Series Chassis 115 8003 chassis This section provides physical, environmental, and electrical specifications for the 8003 Chassis and includes the following topics: • “Physical specifications,” next • “Environmental specifications” on page 116 •...

  • Page 116: Environmental Specifications

    116 Appendix A Technical specifications for the Passport 8000 Series Chassis Environmental specifications The following environmental specifications apply to the 8003 chassis: Specification Parameter Operating temperature: 0° C to 40° C (32° F to 104° F) Storage temperature: –25° C to 70° C (–13° F to 158° F)

  • Page 117: Electromagnetic Emissions

    Appendix A Technical specifications for the Passport 8000 Series Chassis 117 Electromagnetic emissions The 8003 chassis conforms to the following electromagnetic emissions standards: Specification Parameter Global basis for certification: CISPR 22-1997 Class A FCC CFR47 Part 15, Subpart B, Class A...
  • Page 118 118 Appendix A Technical specifications for the Passport 8000 Series Chassis 316314-E Rev 01...

  • Page 119: Index

    21 LEDs power supplies 90 problem indications 90 DTE/DCE switch login prompt, failure to display 92 changing setting of 92 memory cards electrical specifications 41, 57 changing read-write protection 86 Installing and Maintaining the Passport 8000 Series Chassis...
  • Page 120 90 space requirements 40, 57 specifications, technical electrical 41, 57 environmental 41, 58 space 40, 57 straight-through cable 93 support, Nortel Networks 21 system log 91 technical publications 20 technical support 21 text conventions 20 troubleshooting cables 93...

This manual is also suitable for:

Passport 8010Passport 8006Passport 8003

Table of Contents