Nortel 8000 Series Installing And Maintaining page 60

60 8010co chassis installation
Procedure steps
Step
1
2
Procedure job aid
The following figure shows the location of the ground studs on the 8010co
chassis rear panel.
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
Action
Locate the shelf grounding point on the rack. This grounding point
can be a grounding strip at the back base, top, or side of the rack.
"Rack grounding strip example" (page 60)
rack grounding strip. Your rack grounding strip can look different
than the one shown in this example.
Attach the lug ends of the chassis ground cables to the rack
grounding strip.
Use a 7/16-in. hex wrench to fasten the hardware in the correct
order. For more information about attaching the lug ends, see
grounding strip example" (page
Rack grounding strip example
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008
shows an example of a
60).
—End—
"Rack