Nortel 8000 Series Installing And Maintaining page 61

Figure 9
Location of 8010co chassis ground studs
The following figure shows an example of how to ground two 8010co
chassis and a BIP. In this example, each chassis uses three 8004DC power
supplies. Your rack-grounding strip can look different or can be in a different
location than the one shown in the example.
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008
Grounding the chassis 61