Nortel 8000 Series Installing And Maintaining page 55

5
6
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
Use a Phillips screwdriver to remove the five screws that secure
each of the two mounting rails to the 8010co chassis.
For more information about removing the mounting rails, see
"Removing the mounting rails from the 8010co chassis" (page
Removing the mounting rails from the 8010co chassis
Use the 10 screws you removed from the two mounting rails to
reinstall the mounting rails.
For more information about installing the mounting rails, see
"Installing the mounting rails for a Hendry rack" (page
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008
Mounting the chassis in a Hendry rack 55
55).
56).