Nortel 8000 Series Installing And Maintaining page 41

3
4
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
Attaching the rack-mounting brackets to the 8003 chassis
Measure the appropriate number of rack units of free vertical space
inside the rack and mark the spot.
For more information about the number of rack units to allocate for
each chassis, see "Procedure job aid" (page
Hold the chassis in position and align the flanged end of each
mounting rail with the two holes on each side of the vertical rack
support.
Complete this step with two people. Ensure that the hole pairs on
either side of the vertical support match horizontally. For more
information about aligning the rack-mounting brackets, see
the rack-mounting brackets with the equipment rack: 8010 chassis"
(page 41), "Aligning the rack-mounting brackets with the equipment
rack: 8006 chassis" (page
brackets with the equipment rack: 8003 chassis" (page
Aligning the rack-mounting brackets with the equipment rack: 8010
chassis
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008
Mounting the chassis in an equipment rack 41
42), and "Aligning the rack-mounting
44).
"Aligning
42).