Automatic Mode; Music Mode; Dmx Configuration - ProLights VIRTUALDRAPE User Manual

3.4 AUTOMATIC MODE

The VIRTUALDRAPE can independently runs its autoshow.
• Press the button MENU so many times until the display shows Automatic, then press the button ENTER.
• Press the button UP or DOWN to enable (Yes) or disable (No) the automatic mode.
• Press the MENU button to exit.
If you enable this feature, VIRTUALDRAPE will operate in automatic mode by executing the sequence of
programs enabled.
To enable the programs to send in automatic execution proceed as follows:
• Press the button MENU so many times until the display shows Program, then press the button ENTER.
• Press the button ENTER so many times to scroll to the desired program from 1 to 30 (Program 1 - Program
30).
• Once you have selected the desired program, press the button UP or DOWN to include (Yes) or exclude
(No) the selected program in the list of autorun.
• Press the MENU button to exit.
To adjust the auto program speed, proceed as follows:
• Press the button MENU so many times until the display shows Speed, then press the button ENTER.
• Press the UP/DOWN button to select the desired speed (1-9).
• Press the MENU button to exit.

3.5 MUSIC MODE

In music mode, the VIRTUALDRAPE can be controlled by music with a clear rhythm in the bass range. If the
music control should not work optimally, increase the volume or reduce the distance of the sound source.
• Press the button MENU so many times until the display shows Sound, then press the button ENTER.
• Press the button UP or DOWN to enable (Yes) or disable (No) the music mode.
• Press the MENU button to exit.

3.6 DMX CONFIGURATION

The VIRTUALDRAPE is equipped with a 8 channels DMX configuration.
The table on page 12 indicate the operating mode and DMX value.
• To set the DMX address, press the button MENU so many times until the display shows DMX512, then
press the button ENTER.
• Press the button UP or DOWN to enable (Yes) or disable (No) the DMX mode.
• Press the button ENTER to set the DMX address (Address).
• Press the buttons UP/DOWN to select the desired value 001-512; press and hold to scroll faster.
• Press the button ENTER to confirm the setting.
• Press the MENU button to exit.
VIRTUALDRAPE
11