Advanced; Information On The Device; Operations In Automatic Mode - ProLights MOSAICOXL User Manual

• Press repeatedly the button MENU to return the menu mode.

3.11 ADVANCED

It is possible to modify the following parameters following the same procedure:
• Press the MENU button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select Advanced, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to select one off the following parametres:
- Reset - To start a preset program to restore the selected function (All, Cyan, Magenta, Yellow, CTO, Color,
Gobo, Prism, Effect, Focus, Zoom, Frost, Iris, Fr.shutters Rot., Fr.shutter 1 M1, Fr.shutter 1 M2, Fr.shutter 2 M1, Fr.shutter
2 M2, Fr.shutter 3 M1, Fr.shutter 3 M2, Fr.shutter 4 M1, Fr.shutter 4 M2).
- Adjust - To allows you to change all parameters. Insert the password "050" to enter. Select the desired
function (Cyan, Magenta, Yellow, CTO, Color, Gobo, RGobo, Prism, Rot Prism, Effect, Focus, Zoom, Frost 1, Frost 2, Iris,
Fr.shutters Rot., Fr.shutter 1 M1,, Fr.shutter 1 M2, Fr.shutter 2 M1, Fr.shutter 2 M2, Fr.shutter 3 M1, Fr.shutter 3 M2,
Fr.shutter 4 M1, Fr.shutter 4 M2) and the choose the value (0 - 255).
- Factory Reload - To reset the unit. Select Yes or No and select ENTER to confirm.
• Press the ENTER button to confirm the selection and wait for the selected function to be restored.
• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.12 INFORMATION ON THE DEVICE

To view all the information on the device, proceed as follows:
• Press the MENU button to access the main menu. Press the UP/DOWN button to select Information, then
press the ENTER button to access the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information-
and press the ENTER button to display it.- Fixture Time - Through the Fixture Time function, the operat-
ing time of the projector can be shown on the display.
- Fixture Time - To view the operating time of the projector.
- Temperature - To view the temperature of the device in °C/°F on the display.
- Fans Speed - to view on the display the fan speed present near the lamp.
- Software Version - To view the firmware version will show on the display.
- UID - To view the identification ID for the RDM control.
- View - Select the View DMX function to display all DMX menu.
• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.13 OPERATIONS IN AUTOMATIC MODE

Play Show
The unit independently runs through its show. Before you send an automatic program you need to set the
drive as Master/Alone:
• Press the MENU button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Stand Alone, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Show and press ENTER to confirm your
choice.
• Press the UP/DOWN button to select the mode of operation: Show 1, Show 2, Show 3.
• Press the ENTER button to confirm your choice.
MOSAICOXL
19