Menu Structure; Operation In Automatic Mode; Master/Slave Mode - ProLights ARCLED7314HD User Manual

3.3 MENU STRUCTURE

STAT
AUTO
RUN
dMX
PERS
EDIT
SET
CAL
(Password:
UP-DOWN
UP-DOWN)
KEY

3.4 OPERATION IN AUTOMATIC MODE

If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows [AUTO], then press the button ENTER.
• Press the button UP/DOWN to switch between the programs (AUTO 01 - AUTO10 o CUSTOM01 - CUSTOM10). The
unit will operate in automatic mode.
NOTE - Programs AUTO 01 - AUTO10 are fully pre-programmed and will not be altered by changes in EDIT
mode. Programs CUSTOM01 - CUSTOM10 are fully pre-programmed and can be edited in EDIT mode.
In automatic mode the unit will be set as Master.
ARCLED7314HD
RED
R.(000-255)
GREN G.(000-255)
BLUE b.(000-255)
STRB S.(0-20)
AT.01 ÷ AT.10
PR.01 ÷ PR.10
dMX / SLAVE
d.(001-512)
TOUR / TR16 / ARC.1 / AR1.d / AR1.S / HSV
PR.01 ÷ PR.10
UPLd
REST
COLO
OFF/ RGBw / UC
dIMX
DIM4 / DIM1 / DIM2 / DIM3 / OFF
CURV
DERR SAVE/ BLAK
SLCK OFF/ON
STRB SPEC/CLAS
****
ON/OFF
SC.01
RED, GREN,
... BLUE, STRB,
TIME, FADE
SC.30
**** SEND
****
REST
OFF / CV1 / CV2 / CV3
CAL1 wT.01 ÷ wT.11
CAL2 RGBw
CALR ****
R.(000-255), G.(000-255),
b.(000-255), S.(0-20), T.(000-255),
F.(000-255)
OK
OK
R.(000-255)
G.(000-255)
b.(000-255)
R.(000-255)
G.(000-255)
b.(000-255)
OK
9