Configure Identification Dialog Box - HP StorageWorks HA-Fabric Manager Installation Manual

3. Replace the default text with the following entries:
•
•
•
•
4. Click Activate. The Configure Identification dialog box closes and the Element Manager
window at the Hardware View for this device is still displayed.
5.
On the menu bar, select Maintenance > Enable Call Home Notification.
6. Place a check mark in the Enable Call Home Event Notification option.
7. See
68
Figure 3.45. Configure Identification dialog box
Name — Enter a name for this Director or Edge Switch as appropriate for your SAN.
Click Set Name As Nickname, which will display a check mark in the box. This will
be the name that will be displayed with the icon for this Director or Edge Switch in
the HAFM Product View and Fabric View displays.
Description — Enter the address of your installation.
Location — Enter the WFM Site ID and Super Region code, as obtained in
Required Information, separated by "~" (tilde) characters, as shown in the following
example
US1234567890~AA
Contact — Enter the contact name, phone number, and company name exactly
as provided to HP in Obtaining Required
characters, as follows:
FirstName~LastName~PhoneNumber~CompanyName
For example:
Joe~Smith~5085551515~ABCCompany
Testing Remote Notification
Information, separated by "~" (tilde)
for instructions on testing the call-home feature.
hp StorageWorks HA-Fabric Manager Appliance Installation
Chapter 3. Configuration
Obtaining
Guide