Manually Configuring Public Lan Addresses; Lcd Panel (Password Entry) - HP StorageWorks HA-Fabric Manager Installation Manual

Chapter 3. Configuration
9. Record the private LAN IP address and subnet mask for reference if the appliance hard
drive fails and must be restored.

Manually Configuring Public LAN Addresses

To configure TCP/IP network information for the private LAN connection (LAN 1):
1. At the LCD panel, press ENTER. The Welcome!! or operational information message
changes to the following
2. Using the
to move the cursor left, and the
password (9999), then press ENTER. The LAN 1 Setting?? message displays
at the LCD panel.
3. Press ENTER and the following message displays
IP address. (The default is 192.168.0.1).
4.
Use the arrow keys as described in step 2 to input a new IP address, then press ENTER.
The following message displays
default subnet mask is 255.0.0.0).
hp StorageWorks HA-Fabric Manager Appliance Installation
Guide
(Figure 3-9):
Figure 3.9. LCD Panel (Password Entry)
button to increment a digit, the
button to move the cursor right, input the default
Figure 3.10. LCD Panel (LAN 1 IP Address)
(Figure
Figure 3.11. LCD Panel (Input Netmask)
button to decrement a digit, the
(Figure 3-10) with the current LAN1
3-11) with the current subnet mask. (The
button
39