Declaration Of Conformity For Products Marked With Fcc Logo-U.s. Only; Modifications; Network And Serial Cables; Iec Emc Statement (Worldwide) - HP StorageWorks HA-Fabric Manager Installation Manual

Declaration of Conformity for Products Marked with FCC Logo—U.S. Only
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
For questions regarding your product, refer to http://www.hp.com.
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company Product Regulations Manager 3000 Hanover St. Palo Alto, CA
94304
Or call 1-650-857-1501
To identify this product, refer to the part, Regulatory Model Number, or product number
found on the product.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Hewlett-Packard Company may void the user's
authority to operate the equipment.

Network and Serial Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI
connector hoods in order to maintain compliance with FCC Rules and Regulations.

IEC EMC Statement (Worldwide)

This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.
Spécification ATI Classe A (France)
DECLARATION D'INSTALLATION ET DE MISE EN EXPLOITATION d'un matériel
de traitement de l'information (ATI), classé A en fonction des niveaux de perturbations
radioélectriques émis, définis dans la norme européenne EN 55022 concernant la Compatibilité
Electromagnétique.
76
Appendix A. Regulatory and Safety Information
hp StorageWorks HA-Fabric Manager Appliance Installation
Guide