Manually Configuring Private Lan Addresses; Lcd Panel (Input Dns); Lcd Panel (Save Change); Lcd Panel (Password Entry) - HP StorageWorks HA-Fabric Manager Installation Manual

6. Do one of the following:
•
•
7. Use the arrow keys as described in step 2 to enter the IP address for the DNS server, then
press ENTER. The following message displays
8. Use the up and down arrow keys as described in step 2 to select YES, then press ENTER.
If you saved the changes, a Wait a moment!! message displays at the LCD panel
and the LCD panel returns to the LAN 1 Setting?? message.
9.
Press the up and down arrow keys until Return?? is displayed, then press ENTER.
The LCD panel returns to scrolling mode, which continually displays HAFM appliance
operational information.
10. Record the private LAN IP address and subnet mask for reference if the appliance hard
drive fails and must be restored.

Manually Configuring Private LAN Addresses

To configure TCP/IP network information for the private LAN connection (LAN 2):
1. At the LCD panel, press ENTER. The Welcome!! or operational information message
changes to the following
42
Use the up and down arrow keys as described in step 2 to select YES, then press
ENTER. The DNS address is auto-detected and recorded. Proceed to step 8.
Select NO by pressing ENTER. The following message displays
Figure 3.18. LCD Panel (Input DNS)
Figure 3.19. LCD Panel (Save Change)
(Figure
Figure 3.20. LCD Panel (Password Entry)
(Figure 3-19):
3-20):
hp StorageWorks HA-Fabric Manager Appliance Installation
Chapter 3. Configuration
(Figure 3-18).
Guide