Configuring Additional Appliance Information; Accessing The Appliance Desktop; Lcd Panel (Save Change) - HP StorageWorks HA-Fabric Manager Installation Manual

8. Use the arrow keys as described in step 2 to enter the IP address for the DNS server, then
press ENTER. The following message displays
9. Use the up and down arrow keys as described in step 2 to select YES, then press ENTER.
If you saved the changes, a Wait a moment!! message displays at the LCD panel
and the LCD panel returns to the LAN 1 Setting?? message.
10. Press the up and down arrow keys until Return?? is displayed, then press ENTER.
The LCD panel returns to scrolling mode, which continually displays HAFM appliance
operational information.
11. Record the private LAN IP address and subnet mask for reference if the appliance hard
drive fails and must be restored.

Configuring Additional Appliance Information

Configure a computer name and workgroup name for the appliance. If required, change the
appliance's gateway addresses and domain name system (DNS) appliance IP addresses to
conform to the customer's LAN addressing scheme. The gateway addresses are the addresses
of the local router for the corporate intranet. Configure these parameters from the appliance's
Windows 2000 operating system, using a LAN- attached PC with standard web browser.

Accessing the Appliance Desktop

To login and access the appliance desktop:
1. Ensure the appliance and a browser-capable PC are connected through an Ethernet
LAN segment. At the PC, launch the browser application (Netscape Navigator or
Internet Explorer).
44
Figure 3.25. LCD Panel (Save Change)
hp StorageWorks HA-Fabric Manager Appliance Installation
Chapter 3. Configuration
(Figure 3-25):
Guide