Configuring Identification Information For Directors And Edge Switches; Call Home Event Notification Setup Dialog Box - HP StorageWorks HA-Fabric Manager Installation Manual

Chapter 3. Configuration
3. Place a check mark in the Enable Call Home Event Notification option. This enables
the call-home function for the HAFM appliance, as well as for all Directors and Edge
Switches that have also been enabled for call-home notification.

Configuring Identification Information for Directors and Edge Switches

This procedure describes how to configure identification information for each Director and
Edge Switch that is managed by the HAFM appliance.
Repeat this procedure for each Director or Edge Switch you want to configure for call-home
event notification
Note
In order for Directors and Edge Switches to be managed by the HAFM appliance, you must
first add them using the HAFM application. Refer to the
User Guide
Complete the following steps for each Director or Edge Switch managed using HAFM:
1. From the HAFM main window, double-click on the icon for the device. The Hardware
View for the device is displayed.
2. On the menu bar, select Configure > Identification. The Configure Identification dialog
box displays, as shown in
hp StorageWorks HA-Fabric Manager Appliance Installation
Guide
Figure 3.44. Call Home Event Notification Setup dialog box
for more information.
Figure
hp StorageWorks HA-Fabric Manager
3-45.
67