Configuring And Enabling Event Notification Features - HP StorageWorks HA-Fabric Manager Installation Manual

Chapter 3. Configuration
e.
7. Click OK to close the Date/Time Properties dialog box.
8. Click close (X) at the upper right corner of the Control Panel window to return to the
Windows 2000 desktop.

Configuring and Enabling Event Notification Features

The HAFM appliance provides the following event notification features:
Call-home via dial-out — This feature provides automatic dial-out through the modem to a
•
service support facility to report Director or Edge Switch problems. This functionality is
provided in the shipped software.
• Proactive Services call-home via LAN — This feature reports events via the LAN to a
SANworks Management Appliance or other server running the HP Proactive Services
software.
HP Proactive Services software is offered at no additional charge for subsystems covered
under an on-site warranty or on-site storage hardware support contract. To order Proactive
Services software, contact your Hewlett-Packard customer service representative.
Note
You can choose only one of the two call-home options: call-home via dial-out or call-home via
LAN. You can use either feature, but not both.
The HAFM appliance is shipped with the HAFM application installed and the call-home via
dial-out feature selected by default. If you prefer to use the Proactive Services call-home via
LAN feature, you must:
• E-Mail event notification — This feature enables you to configure e-mail addresses to
which event notifications are sent for the HAFM appliance, Directors and Edge Switches.
The following sections describe configuring event notification features:
• Configure the Call-Home via Dial-Out Feature
• Configure Proactive Services Call Home via LAN Feature
• Configure E-Mail Event Notification
hp StorageWorks HA-Fabric Manager Appliance Installation
Guide
Click Apply. Record date and time information for reference if the appliance
hard drive fails and must be restored.
• Order the Proactive Services software.
• Uninstall the HAFM application.
• Reinstall the HAFM application.
• Select the call-home via LAN option during the HAFM application installation.
63