Verify Proper Output Voltage; Set The System Clock; Modify The Screen Contrast (Optional Step); Set Automatic Restart Mode (Optional Step) - Gamatronic MEGA V2 SA25 User Manual

7.2.3

Verify proper output voltage

Before turning the UPS on for the first time, go to the first profile screen to verify that the nominal
output voltage is correct for your country and location.
on page 17 explains how to display the Profile screen.
In the unlikely event that you need to change the UPS's output voltage,
see "Changing the nominal output voltage" on page 42.
7.2.4

Set the system clock

Now set the system clock to the correct date and time.
See "Setting the system clock" on page 41.
7.2.5

Modify the screen contrast (optional step)

You can modify the screen contrast, if necessary.
See "Setting screen contrast" on page 42.
7.2.6

Set automatic restart mode (optional step)

You can enable automatic restart mode at this time, if desired.
See "Automatic Restart" on page 45.
User Guide: MEGA V2 SA25, Release 1.5
Gamatronic Electronic Industries Ltd.

Figure 38: Verify proper output voltage

39