Installing And Connecting Your Telephony Gateway; Front Panel - Arris Touchstone TG862G/NA User Manual

Installing and Connecting your Telephony
Gateway
Before you start, make sure that:
You have contacted your service provider and verified that they provide data and

telephone service using standard DOCSIS technology.
You have all the

Cable, phone, and power outlets are available near the computer. If a cable outlet is not

conveniently located, your service provider can install a new one.
If you have ordered service, your service provider should configure the Telephony Gateway
automatically. You need only follow the instructions in this section to install and connect the
Telephony Gateway.
CAUTION
Risk of equipment damage
Only qualified installation technicians should connect the Telephony Gateway to house wiring.
Incumbent telephone service must be physically disconnected at the outside interface box
before making any connections.

Front Panel

The front of the Telephony Gateway has the following indicators.
1. Battery: indicates the battery status.
2. Tel 2: indicates the status of telephone line 2.
3. Tel 1: indicates the status of telephone line 1.
4. Secure: indicates that Wireless Protected Setup (WPS) is active.
Release 8 STANDARD 1.5 August 2016
© 2011-2016 ARRIS Enterprises LLC. All Rights Reserved.
Items You Need
(page 11).
Touchstone TG862G Telephony Gateway User Guide
Chapter 5
23