Development Of Applications - Embest SBC8600B User Manual

Embest Technology Co., Ltd
Booting from dvsdk ...
reading zImage
3175384 bytes read
## Booting kernel from Legacy Image at 80007fc0 ...
Image Name:
Image Type:
Data Size:
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK
Starting kernel ...
......
Arago Project http://arago-project.org am335x-evm ttyO0
Arago 2011.09 am335x-evm ttyO0
am335x-evm login: root
Type user name root to log in the system when you see prompt information
am335x-evm login in HyperTerminal window; TISDK filesystem includes some
pre-installed applications which can be run under QT graphical interface.
Note:
 By default, the system support 4.3-inch screen. If you need to select another display
mode, please refer to 3.10 Display Mode Configurations.
 The profile file sbc8600_tisdk.h is located in u-boot-2015.07/include/configs/, if you want
to geraruation TISDK u-boot, the following instructions should be Executed

make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- sbc8600_tisdk_config

make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-

3.12 Development of Applications

This section will introduce the common process of development applications through
several examples.
Copyright © 2017 Embest Technology
Linux-3.2.0
ARM Linux Kernel Image (uncompressed)
3175320 Bytes = 3 MiB
//Omitted part
//Type root to log in
SBC8600B-UM-V2.0
88