Rs485 Testing - Embest SBC8600B User Manual

Embest Technology Co., Ltd
The terminal window will print the information of the received data package

root@arm:~# candump can0
6) Stop the CAN device

root@arm:~# ipconfig can0 down
You can run the test with different baudrates. The following table contains several
baudrates which have been proved. However, you can also try other baudrates if you
want.
Note:
 You need to disable CAN bus BEFORE you can set a new baud rate. The two end
devices of CAN communication must set identical baud rate.
 For source code, please refer to Open-Source software can-utils.

3.11.13 RS485 Testing

Please connect SBC8600B to another device enabled with RS485 bus according to
the figure shown below and the schematic under /HW design/schematic/ in the
DVD-ROM;
Copyright © 2017 Embest Technology
Proved Baudrates
Table 3-5
No. Proved Baudrates
1 25Kbps(250000)
2 50Kbps(50000)
3
125Kbps(125000
4 500Kbps(500000)
5
650Kbps(650000
6 1Mbps(1000000)
)
)
SBC8600B-UM-V2.0
78