Update Of Nand Flash Image - Embest SBC8600B User Manual

Embest Technology Co., Ltd
+OALTimerInit(1, 24000, 200)
--- High Performance Frequecy is 24 MHz---

5.3.2 Update of NAND Flash Image

a. Formatting TF card
Please refer to the contents of Update of TF Card.
b. Copy runtime image
Copy MLO, EBOOTND.nb0, NK.bin, XLDRNAND.nb0 and EBOOTSD.nb0 image
files under CD\WINCE700\image to the TF card.
c. Update of NAND Flash image files
Insert TF card and short jumper JP5, reboot the system from TF card and press
Space in a few seconds to enter to the EBOOT menu, and then follow the steps listed
below:
1) Type [8] to enter the Flash menu;
2) Type [9]->[4]->[A], [9]->[3]->[B] and [9]->[2]->[C] to write XLDR, EBOOT and
NK images;
3) Type [0] to return to the main menu, and then type [2] and [3] to select
boot-up from NAND Flash; Type [A] to select LCD/DVI display mode; Type
[7] and [y] to save the boot-up settings;
Remove TF card and the jumper cap, reboot the system. The system will boot from
NAND Flash.
Copyright © 2017 Embest Technology SBC8600B-UM-V2.0
121