Page 2
FCC NOTICE: This kit is designed to allow: (1) Product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and (2) Software developers to write software applications for use with the end product. This kit is not a finished product and when assembled may not be resold or otherwise marketed unless all required FCC equipment authorizations are first obtained.
Table of Contents Product Overview ......................1 Packing List ....................... 1 Factory Default Conditions ................1 Quick Use of Lark Board ....................2 Check the DIP Switches status ................. 2 The Hardware connection of Debug serial port ..........2 The Configuration of the serial port ..............3 Lark Board Boot-up ...................
Quick Use of Lark Board Lark Board has been installed with Yocto image by default so that the board could be booting and running immediately. This chapter will introduce how to realize a quick use of Lark Board through simple hardware connections and software configurations. Please follow the quick steps listed below.
Technical Support and Warranty Technical Support Embest Technology provides its product with one-year free technical support including: Providing software and hardware resources related to the embedded products of Embest Technology; Helping customers properly compile and run the source code provided by Embest Technology;...
Need help?
Do you have a question about the Altera Lark Board and is the answer not in the manual?
Questions and answers