Menu Options - Embest SBC8600B User Manual

Embest Technology Co., Ltd
Please execute the following instructions to enter the configuration menu:

cd linux-4.1

cp arch/arm/configs/embest_ti_sbc8600_defconfig .config

make menuconfig
Note:
 If an error occurs when command 'make menuconfig' is executed, you might need to
install 'ncurse' in the Ubuntu system; 'ncurse' is a character graphic library required to
generate configuration menu; please enter the following instruction to install the library:
sudo apt-get install ncurses-dev

3.6.2 Menu Options

Configure options according to customization requirements after entering
configuration menu, for example, access Device Drivers > USB support > USB Gadget
Support > USB Gadget Drivers as shown below;
Set USB Gadget Drivers（Serial Gadget......） to M, and then exit and save changes.
Copyright © 2017 Embest Technology
USB Gadget Drivers
Figure 3-2
SBC8600B-UM-V2.0
36