Legal Information - Otto Bock 1P9 Instructions For Use Manual

3 Handling
CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
• Observe the alignment and assembly instructions.
NOTICE
Grinding the prosthetic foot
Premature wear resulting from damage to the prosthetic foot
• Do not grind the prosthetic foot.
We recommend using 636W17 Adhesive and 636W26 Hardener to bond
the Pirogoff Foot to the ankle block.
First, mix the adhesive with 4 % hardener. Apply this mixture to both bonding
surfaces and let the surfaces air dry for 5 – 8 minutes. Firmly press the ankle
and foot together for at least one hour. The highest degree of bonding strength
will be reached after 24 hours of curing with the parts pressed together.
Tools used in this process may be cleaned using 634A23 Thinner.

4 Legal information

All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
4.1 Liability
The manufacturer will only assume liability if the product is used in accor-
dance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregard of
this document, particularly due to improper use or unauthorised modification
of the product.
Ottobock | 9