Graco 24Z764 Instructions Manual page 33

4. The cursor automatically is
positioned to entered the first
character of the PIN Code.
Use the UP and DOWN
ARROW buttons to move up
and down through the numbers 0-9 until the first
number in the PIN code is displayed in the field.
5. Press the ENTER button to set the
number. The cursor automatically
moves to the next number field.
6. Repeat steps 4 and 5 for each PIN Code prompt
field.
7. Press the ENTER button to save the
PIN Code and exit Advanced Setup.
Entering Advanced Setup
Press the UP ARROW button for 10
seconds.
If the pump was previously set up to require
a PIN Code, the LED next to the LOCK ICON lights,
indicating a PIN Code is required.
1. The cursor is automatically
positioned to enter the first
character of the PIN Code.
Use the UP and DOWN
ARROW buttons to move up
and down through the numbers 0-9 until the first
number in the PIN code is displayed in the field.
2. Press the ENTER button to set the
number. The cursor automatically
moves to the next number field.
3. Repeat steps 1 and 2 for each PIN Code prompt
field.
If the PIN Code you entered is correct, the first editable
character on the display will flash.
3A5082G
Selecting Advanced Setup Options
1. Press the UP or DOWN
ARROW button to move up or
down between Advanced
Options.
2. Press the ENTER button to set the
selection.
3. When the correct number displays,
press the ENTER button to set the
number.
4. Repeat 2 - 3 to set the remaining fields.
5. Press the ENTER button to exit
Advanced Programming.
A6 - Clearing the Functional and Technical
User Summary (DMS
The Pump Summary shows run details since the last
time the summary was cleared.
1. Press the UP or DOWN
ARROW button to move
through Advanced Options
until Advanced Option A6 is
displayed.
2. Press the ENTER button.
3. "Data" displays.
4. Press the RESET
button. "Reset"
displays. The summary
data is cleared.
5. Press the RESET or
ENTER button to exit.
Pump
™
Models only)
33