Graco 24Z764 Instructions Manual page 22

Pump
If the PIN Code you entered is correct, the first editable
character on the display will flash.
NOTE: A blinking field on the display indicates the pump
is in SETUP MODE. In RUN MODE numbers on the
display will not blink.
Setting the Real Time Clock - DMS and
Illuminated Remote Run Button Models
NOTE: Set the real time clock prior to plugging the USB
flash drive into the pump.
Enter the Year:
• The year displays.
The first
programmable
character, the
decade, blinks
indicating the device
is ready to program the decade digit of the year.
• The LED under the # sign lights while setting the
year.
1. Use the UP and DOWN arrow
buttons to move up and down
through the number 0-9 until the
number for the current decade is
displayed in the field.
2. Press the ENTER button to set the
decade number. The cursor
automatically moves to the next
field, the year number.
3. Use the UP and DOWN arrow
buttons to move up and down
through the number 0-9 until the
number for the current year is
displayed in the field.
4. Press the ENTER button to set the
year number.
The 3-character month displays indicating the is
now ready to program the month.
22
Enter the Month:
1. Set the 3 character month by using
the UP and DOWN ARROW
buttons to move up and down
through the list of months until the
current month is displayed in the
field.
2. Press the ENTER button to set the
month.
The 2-digit date displays indicating the is now ready
to program the date.
Enter the 2-digit Date:
The first programmable
character of the 2-digit
date blinks indicating the
device is ready to
program the first digit of
the date.
The LED under the # sign lights while setting the date.
1. Use the UP and DOWN ARROW
buttons to move up and down
through the numbers 0-3 until the
first digit of the date is displayed in
the field.
2. Press the ENTER button to accept
the selection. The cursor
automatically moves to the second
digit of the date.
3. Use the UP and DOWN ARROW
buttons to move up and down
through the numbers 0-9 until the
second digit of the date is
displayed in the field.
4. Press the ENTER button to set the
date.
The time displays indicating the is now ready to
program the time.
3A5082G