Tri-Color Remote Illumination; Direct Mount Vent Valve - Graco 24Z764 Instructions Manual

F . 17
IG

Tri-Color Remote Illumination

Pump in OFF Mode
Pump in ON Mode
Low Level Warning
Overcurrent Warning
Condition
Low Level Fault
System Fault
3A5082G
Tri-Color Remote Illumination
No indication
Green - ON
Yellow - Toggles ON and OFF
once per second
Yellow
Red - Toggles ON and OFF
once per second
Red

Direct Mount Vent Valve

The Direct Mount Vent Valve is installed on the pump
when it is shipped to the customer from Graco. Vent
Valve Replacement Kits 25C965 (2000 psi) and 26C493
(1000 psi) for 12 Volt pumps and 25C966 (2000 psi) and
26A856 (1000 psi) for 24 Volt pumps are available from
Graco. Contact your local Graco Distributor or Graco
Customer Service for assistance when ordering this
part.
Connect one end of the vent valve cable (36)
(Graco Part No. 129801) to the vent valve
connector on the pump. Connect the other
end of the cable to the vent valve (35) as
shown F . 18.
IG
R
35
36
F . 18
IG
Vent Valve Outputs
See Technical Data, page 65 for ratings.
F . 19
IG
Pump
17