Completing The Installation; Installation Test Cycle - Fisher & Paykel WM1490F Installation Instructions Manual

• If you are using an extension cord or a portable electrical outlet device (eg multisocket outlet
• Do not touch or operate the machine with wet hands or with bare-feet.
• A damaged power cord must be replaced by a Fisher & Paykel trained and supported service
• Do not operate this machine if it has been damaged during transport. Contact your Fisher &
SPARE PARTS
Available from your Fisher & Paykel dealer or a Fisher & Paykel trained and supported service technician.
Hose Inlet Long (2m)
Hose Inlet Large Bore
Drain Hose Extension (Not suitable for attaching to a spigot).

Completing The Installation

Installation Test Cycle

Do this before you wash any items in your washer. This is to check that your washer is installed
correctly and that it is functioning correctly prior to use.
1. Turn your washer on by pressing the 'POWER' button.
2. Select the 'Quick' or 'Super Quick' cycle. Ensure the drum is empty and the door closed.
3. Touch
the button. The machine will start to fill.
• Observe the machine for any problems (eg leaking from the hoses, excess noise or vibrations).
https://producthelp.fisherpaykel.com/eu/Wash/Front_Loaders/WashSmart/WM1480P1/User_Guide_WM1480P1/03_Installatio...
box), ensure that it is positioned so that it does not come into contact with water or moisture.
FAILURE TO DO SO MAY RESULT IN DEATH OR ELECTRICAL SHOCK.
technician, in order to avoid a hazard. The appliance must not be operated until it is repaired, as
there is risk of electric shock.
Paykel dealer or Fisher & Paykel trained and supported service technician.
Part No. 422680P
Part No. 426123P
Part No. 425627P
Updated: Wed, 12 Feb 2020 12:46:42 GMT
Powered by
10