Levelling The Machine; Connecting To The Water Supply - Fisher & Paykel WM1490F Installation Instructions Manual

Levelling The Machine

It is IMPORTANT to level the machine to ensure good spin performance,
and to minimise noise, vibrations and wear and tear on the washer.
1. Before positioning the machine in its final position, check that the
machine is level, front to back and side to side.
2. Manoeuvre the product into its final position (we suggest a minimum
clearance of 20mm each side).
3. Use a spirit level to check that the machine is correctly level. If
needed, pull the machine out. Loosen the lock nut using the spanner
provided and wind the feet up or down to correctly level the machine.
4. Using the spanner provided, tighten the lock nuts against the base of
the machine to lock the feet in position.

Connecting To The Water Supply

https://producthelp.fisherpaykel.com/eu/Wash/Front_Loaders/WashSmart/WM1480P1/User_Guide_WM1480P1/03_Installatio...
Locking the feet
Inlet hose ends
Updated: Wed, 12 Feb 2020 12:46:42 GMT
Powered by
5