Table of Contents
Advertisement
washer is level in all areas. Repeat step 4 if
necessary. Check the washer does not rock from
side to side, front to back, or corner to corner.
Completing your installation
• Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses. Check
the hose connections for leaks again after 24 hours.
• Uncoil power cord, remove and discard the plastic pin cover, and plug into wall socket.
• Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
Do not touch or operate the washer with wet hands or with bare feet.
https://producthelp.fisherpaykel.com/au/Wash/Top_Loaders/CleanSmart/WL8060P1/User_Guide_WL8060P1/03_Installation_...
• Keep your spirit level for
the next time you move or
reposition your washer.
• If moving or transporting
your washer in the future,
ensure you tape the lid
down beforehand.
Fig.2 Tilt washer forward
Fig.3 Levelling from front to back
Updated: Fri, 14 Feb 2020 17:08:14 GMT
Powered by
8
Advertisement
Table of Contents
