Fisher & Paykel WM1490F Installation Instructions Manual page 11

• The washer will beep and display any faults on the screen if there are any problems. Refer to 'Before you
call for Service' section at the back of this book.
4. Wait until you see water in the bottom of the drum.
5. Touch
to stop the cycle, then press 'POWER' to turn the machine off.
6. Press 'POWER' again, select the 'Spin' cycle and touch
.
• Check the drain hose is firmly secured to the standpipe or tub, or spigot.
• Observe that the machine pumps out the water, and spins.
If there are any problems, you must address these before proceeding with normal use. The washer
will automatically turn off at the end of the cycle if there are no problems.
https://producthelp.fisherpaykel.com/eu/Wash/Front_Loaders/WashSmart/WM1480P1/User_Guide_WM1480P1/03_Installatio...
Updated: Wed, 12 Feb 2020 12:46:42 GMT
Powered by
11