Complete Installation; Installer Checklist - Fisher & Paykel WL8058G1 Installation Manual

Top load washing machine
Hide thumbs Also See for WL8058G1:
Table of Contents

Advertisement

COMPLETE INSTALLATION

Completing the installation
Turn on the water and check all hose connections for leaks. Ensure there are no kinks in
z
the hoses. Check the hose connections for leaks again after 24 hours.
Uncoil power cord, remove and discard the plastic pin cover, and plug into wall socket.
z
Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
z
Complete a test cycle with an empty drum.
z
Test cycle
Your washer must be correctly installed before use. Check the installation and operation of
the washer using the following procedure:
1
2
3
If there are any problems, you must address these before proceeding with normal use.
The washer will automatically turn off at the end of the cycle if there are no problems.
If you need further assistance, please contact a Fisher & Paykel trained and supported
service technician or our Customer Care Centre.
Touch
to activate your washer.
Select
QUICK CYCLE.
Touch
to start the test cycle.

INSTALLER CHECKLIST

TO BE COMPLETED BY THE INSTALLER
Have all packaging been removed?
Is the washer correctly levelled, feet are extended and cabinet corners are clear of
the floor?
Is the drain hose connected and clamped to the drain outlet at the rear of the machine?
Is the drain hose threaded through the hose guide 'U bend' (with no more than 20mm
extended) and hooked into your standpipe or tub?
Is the hot hose connected to the hot valve marked 'H', or blanking cap installed?
Is the cold hose connected to the cold valve marked 'C'?
Have the taps been turned on?
Has the power cord been connected to an appropriate power supply and the power
turned on?
Have you performed a test cycle?
Complete a
cycle with High water level selected, with a half-load amount of
HYGIENE
detergent and without a load to remove any residues remaining from the manufacturing
process.
Complete and keep for safe reference:
Model
Serial no.
Purchase date
Purchaser
Dealer address
Installer's name
Installer's signature
Installation company
Installation date
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wl9058g1Wl1064g1Wl1064p1Wl1264p1

Table of Contents