Table of Contents
Related Manuals for Fisher & Paykel WA70T60GW1
Summary of Contents for Fisher & Paykel WA70T60GW1
- Page 1 Installation Instructions Product And Minimum Clearance Dimensions https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT Powered by...
- Page 2 † Includes adjustable mounted feet and the range of movement. # Applies either side. MW5* MW6* WA8* WA5* WA6* Maximum capacity (kg) Maximum capacity may differ according to market, and the associated standards. https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT Powered by...
-
Page 3: Removing The Packaging
Install the washer on a solid and level floor surface ensuring it has at least 20mm clearance on each side. The washer must not be installed on any textured floor coverings (eg carpets, rugs). https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT... -
Page 4: Drain Hose
• A damaged power cord must be replaced by a Fisher & Paykel trained and supported service technician, in order to avoid a hazard. • The appliance must not be operated until it is repaired, as there is a risk of electric shock. https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT Powered by... -
Page 5: Water Supply
• Do not operate this washer if it has been damaged during transport. Contact your Fisher & Paykel dealer or Fisher & Paykel trained and supported service technician. https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT Powered by... -
Page 6: Inlet Hoses
The cap is available from your Fisher & Paykel dealer or Fisher & Paykel trained and supported service technician, Part No. 388491P. This appliance incorporates backflow protection complying with AS3500.1. No further backflow protection is required for connection to the water supply. https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT Powered by... -
Page 7: Levelling Your Washer
3. Visually check that the lid fits evenly on both sides. If it does not look like the diagram in the middle, adjust one of the feet slightly until it matches. The diagram on the top and bottom are not correct (see Diagram 2). Diagram 1 Diagram 2 https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT Powered by... -
Page 8: Completing Your Installation
• Uncoil power cord, remove and discard the plastic pin cover, and plug into wall socket. • Connect the appliance to an earthed outlet protected by a fuse of suitable capacity. https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT Powered by... - Page 9 If the power cord of your clothes washer is damaged it is highly recommended that it is replaced by a Power Fisher & Paykel trained and supported service technician in order to avoid a hazard, as it is not a Cord standard power cord. https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst… Updated: Wed, 20 Jan 2021 23:10:07 GMT Powered by...
Need help?
Do you have a question about the WA70T60GW1 and is the answer not in the manual?
Questions and answers