Table of Contents
Advertisement
5. Move the spirit level to the right side, in line with
the centre of the bowl. Adjust the front right foot
(wind down) until the machine is level, and
does not rock. There should be equal weight on
both front feet so that neither can be turned by
hand when the machine is in position.
6. Place the spirit level at the centre front of the
topdeck, forward of the lid lock slot. Check the
machine is level. Move the spirit level around to
all positions once more, checking the machine
is level in all areas. Check the machine does
not rock side to side, front to back, or corner to
corner.
Keep your spirit level for the next time you move or reposition your washer. If moving or
transporting your washer in the future, ensure you tape the lid down beforehand.
Completing your Installation
• Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses. Check
the hose connections for leaks again after 24 hours.
• Uncoil power cord, remove and discard the plastic pin cover, and plug into wall socket.
Installation test cycle
Your washer must be correctly installed before use. Check the installation and operation of the machine using the
following procedure:
https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA1068G1/User_Guide_WA1068G1/02_Installation...
Fig.7 Levelling – Step 5
Fig.8 Levelling – Step 6
Updated: Sat, 30 May 2020 19:03:41 GMT
Powered by
6
Hide quick links:
Advertisement
Table of Contents
