Fisher & Paykel WM1490F Installation Instructions Manual page 4

Product Dimensions
The exact height of your washer is dependent on how far the feet are extended from the base of the
machine. The space where you install your washer needs to be at least 40mm wider and 20mm
deeper than its dimensions.
• Electrical supply: 220 – 240V, 50Hz Sinusoidal, minimum 10A.
• Inlet water static pressure: Max. 1MPa (150psi), Min. 30kPa (4.5psi).
• Inlet water flow rate at tap: Min. 6 litres/min.
Location
Install the machine on a solid and level floor surface ensuring it has at least 20mm clearance on each
side. The washer must not be installed on any textured floor coverings (eg carpet, rugs).
This machine must not be installed and operated on a plinth.
https://producthelp.fisherpaykel.com/eu/Wash/Front_Loaders/WashSmart/WM1480P1/User_Guide_WM1480P1/03_Installatio...
WM1490F, WM1490P
mm
9.0
Updated: Wed, 12 Feb 2020 12:46:42 GMT
WM1480P, WM1280J
mm
8.0
Powered by
4