Completing The Installation; Installation Test Cycle - Fisher & Paykel WH1060P1 Installation Instructions Manual

• If you are using an extension cord or a portable electrical outlet device (eg multi-socket outlet
• Do not touch or operate the machine with wet hands or with bare feet.
• A damaged power cord must be replaced by a Fisher & Paykel trained and supported service
• Do not operate this machine if it has been damaged during transport.
Spare Parts*
Hose inlet long (2m)
Hose inlet large bore
Drain hose extension (not suitable for attaching to a spigot)
*Available from your Fisher & Paykel dealer or a Fisher & Paykel trained and supported service technician.

Completing The Installation

Installation Test Cycle

Do this before you wash any items in your washer. This is to check that your washer is installed
correctly and that it is functioning properly prior to use. We recommend to do an initial wash with a
half dose of detergent.
1. Turn your washer on by pressing the 'POWER' button.
2. Select the 'Quick' or 'Super Quick' cycle. Ensure the drum is empty and the door closed.
3. Touch the
button. The machine will start to fill.
– Observe the machine for any problems (eg leaking from the hoses, excess noise or vibrations).
https://producthelp.fisherpaykel.com/au/Wash/Front_Loaders/WashSmart/WH1060P1/User_Guide_WH1060P1/03_Installatio...
box), ensure that it is positioned so that it does not come into contact with water or moisture.
FAILURE TO DO SO MAY RESULT IN DEATH OR ELECTRICAL SHOCK.
technician, authorised repairer or similarly qualified person in order to avoid a hazard. Do not
use the appliance until it has been repaired to avoid a risk of electric shock.
Contact your Fisher & Paykel dealer or Fisher & Paykel trained and supported
service technician.
Part No.
422680P
426123P
425627P
Updated: Mon, 06 Apr 2020 08:08:16 GMT
Powered by
11