Table of Contents
Advertisement
Correct
To assess levelling, check lid alignment
Incorrect
To check levelling look down on the wash bowl
If moving or transporting your washer in the future, ensure you tape the lid down beforehand.
Completing Your Installation
• Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses. Check
the hose connections for leaks again after 24 hours.
• Uncoil power cord, remove and discard the plastic pin cover, and plug into wall socket.
• Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst...
Updated: Wed, 20 Jan 2021 23:10:07 GMT
Powered by
8
Advertisement
Table of Contents
