Navigation - gefran SIEIDrive ADV200 Quick Start Up Manual, Specification And Installation

LED's meaning:
T+ the LED is lit, when the drive operates with a positive torque
T- the LED is lit, when the drive operates with a negative torque
EN the LED is lit, when the drive is enabled
LOC The led is lit when the drive is in local mode and OFF when in remote
mode.
Ilim the LED is lit, when the drive operates at a current limit. During normal
functioning, this led is OFF.
n=0 the LED is lit; it signals zero speed
AL the LED is lit; it signals a trip

6.2 Navigation

6.2.1 Scanning of the fi rst and second level menus
1st level
T+ T - EN LOC ILim n:0 AL
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
(*) This example is visible only in Export mode (see
6.2.2 Display of a parameter
T+ T- EN LOC ILim n:0 AL
1
1 6 . 0 1 PA R : 2 0 0 0
2
Rated volta e g
400
3
+
V
4
Def: +400
T+ T- EN LOC ILim n:0 AL
1
0 4 . 0 2 PA R : 5 5 2
2
Re g ulation mode
V / f c o n t r o l
3
4
Value: 0
T+ T- EN LOC ILim n:0 AL
1
Autotune
2
3 Error code: 1
4
Press ESC to exit
1 Position of the parameter in the menu structure (in fi gure A, 16.01);
number of the parameter (in fi gure A, PAR: 2000).
ADV200 • Quick start up guide - Specification and installation
T+ T - EN LOC ILim n:0 AL
27 SERVICE
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
T+ T - EN LOC ILim n:0 AL
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
paragraph
T+ T- EN LOC ILim n:0
1 3 . 0 5 PA R : 1 3 3 0
Di g out 1 inversion
ON
A
T+ T- EN LOC ILim n:0
0 4 . 0 1 PA R : 5 5 0
Save arameters p
Press E to execute
D
G
2nd level
T+ T - EN LOC
22 FUNCTIONS
23 COMMUNICATION
24 ALARM CONFIG
25 ALARM LOG
T+ T - EN LOC
22.1 SPEED RATIO
22.2 DROOP
22.3 INERTIA COMP
22.4 DC BRAKING
6.5.2).
AL T+ T- EN LOC ILim
0 5 . 0 4 PA R :
Ram ref 1 src p
Mlt ref out mon
Value: 2034
B
AL T+ T- EN LOC ILim
0 1 . 0 1 PA R :
Out p ut current
0. 3
+
Param read onl y
E
ILim n:0 AL
(*)
ILim n:0 AL
n:0 AL
6 1 0
C
n:0 AL
2 5 0
A
F
49