Option Enable Utility; Accessing The Option Enable Utility; Enabling Or Removing Options - Keysight Technologies M937 A PXIe Series Service Manual

General Product Information

Option Enable Utility

Option Enable Utility

Accessing the Option Enable Utility

To start the option enable utility:
- Click Utility > System > Service > Option Enable.
- The dialog box illustrated in
Figure 1-3 Option Enable Dialog Box

Enabling or Removing Options

Software options add features or functionality to the analyzer without the need
for additional hardware. These options are enabled using a special keyword.
They are enabled using the option enable utility.
Options require a license key that is provided by Keysight. If you do not
have the required license key, contact Keysight for assistance. Refer to
"Contacting Keysight" on page
To enable or remove an option:
1. Start the option enable utility. Refer to
2. Click the arrow in the Select Desired Option box. A list of available options,
Keysight M937xA PXIe Service Guide
similar to the following list, will appear.
010 Time Domain
551 Multiport
Figure 1-3 is displayed.
1-3.
Accessing the Option Enable Utility.
1-13