Tests, Adjustments, and Troubleshooting
Preliminary Checks
3. Click Begin.
4. If shorts and opens are not connected to all ports, you will be prompted to
5. The result of the Operator's Check will be shown as a PASS or FAIL to each
Figure 2-3 Operator's Check Dialog Boxes
If the Operator's Check Fails
1. Clean the test ports, and the open(s) or short(s), and torque to specification.
2. If the check still fails, return the network analyzer to Keysight.
Keysight M937xA PXIe Service Guide
connect them as they are needed.
test (refer to
Figure
2-3).
Repeat the check.
Your Network Analyzer for Service or Repair" on page
See"Shipping
1-3.
2-13