Light Source Settings Menu - Eiki EK-810U Owner's Manual

Light Source Settings Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings
and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to
select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu)
to select or adjust the desired settings and press the Enter button to confirm.
Item
Light Source Mode
Constant Power Settings
Constant Luminance
Settings
Total Projector Hours
PICTURE
Light Source Mode
Constant Power Settings
Constant Luminance Settings
OUTPUT
Total Projector Hours
SETUP
OPTION
Select Constant Power, Constant Luminance, or Eco Mode. When in
Eco Mode, the projector will adjust to the lowest fan speed and switch the
light source power to the minimum setting.
Set the value of the light source power (in Watts).
Set the value for the Constant Luminance to maintain constant brightness.
The light sensor will monitor the light level and will apply more power as the
light source brightness decays naturally over time. When the light source
setting reaches maximum power, it will remain at this setting. Note that the
light sensor needs to be calibrated for Constant Luminance mode to work
properly.
Display the projection time.
DLP Projector — Owner's Manual
Light Source Settings
Description
43
— —
Constant Power
10
10
0