Light Source Settings Menu - Eiki EK-610UA Owner's Manual

Light Source Settings Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings
and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to
select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu)
to select or adjust the desired settings and press the Enter button to confirm.
I
tem
Light Source Mode
Constant Power Settings
Total Projector Hours
Lamp Hours
Reset Lamp Hours
PICTURE
Light Source Mode
Constant Power Settings
Total Projector Hours
OUTPUT
Lamp Hours
Reset Lamp Hours
SETUP
OPTION
Select Constant Power or Eco Mode. When in Eco Mode, the projector
will adjust to the lowest fan speed and switch the light source power to the
minimum setting.
Set the value of the light source power (in Watts).
Display the overall projection time.
Display the lamp used hours.
Reset the lamp used hours counter to zero. Do this after changing the
lamp.
DLP Projector — Owner's Manual
Light Source Settings
D
escrIptIon
45
— —
Constant Power
10