Maintenance And Cleaning - IKA IC control Operating Instructions Manual

The device is maintenance-free� It is only subject to the
natural wear and tear of components and their statistical
failure rate�
Cleaning:
Disconnect main plug prior to
cleaning!
Use only cleaning agents which have been approved by
IKA to clean IKA devices: Water containing tenside/ iso-
propyl alcohol�
- Wear protective gloves while cleaning the device�
- Electrical devices may not be placed in the cleansing
agent for the purpose of cleaning�
- Do not allow moisture to get into the device when
cleaning�
- Before using another than the recommended method
for cleaning or decontamination, the user must ascertain
with IKA that this method does not damage the device�

Maintenance and cleaning

Spare parts order:
When ordering spare parts, please give:
- Machine type
- Serial number, see type plate
-
- Software version�
Repair:
Please send instrument for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard�
Return the instrument in its original packaging�
Storage packaging is not sufficient� Please also use
suitable trans-port packaging�
26