Cooling Coil; Charging The Battery Pack Rb 1 (Rechargeable Battery); Changing Battery To Wico; Wico - Holder Wh 10 - IKA IC control Operating Instructions Manual

Hide thumbs Also See for IC control:

Table of Contents

• Cooling coil:

When the set temperature close to the ambient temperature, the cooling coil should be used for counter-cooling due

to the self-heating�

Connect the water supply and return line hoses to the cooling coil connectors (see Fig� 2)�

For bath temperatures > 95 °C do not use the cooling coil with water�

For bath temperatures > 60 °C make sure that the flow rate through the cooling coil is high enough, to avoid exces-

sive calcification�

The battery pack of the WiCo can be charged by any of the following means:

- On the station

- Via a USB cable at the PC or station

- Via an OS 1�0 power supply unit�

Fig. 13

Please comply with the relevant safety instructions in the "Safety instructions" section for

NOTICE

the RB 1 battery pack!

• WiCo – holder WH 10:

Fig. 14

WiCo – holder WH 10

H 44 Boss head clamp

H 38 Holding rod

Table of Contents

Do you have a question about the IC control and is the answer not in the manual?

Hbc 5 control Hbc 10 control