Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IKA INC 125 F digital
Summary of Contents for IKA INC 125 F digital
- Page 1 INC 125 F digital...
- Page 2 ENGLISH...
- Page 3 Fig. 2 Fig. 1...
-
Page 4: Table Of Contents
Explication of warning symbols ��������������������������������������������������������������������7 EN ISO 12100 and DIN 12880� A copy of the complete EU Declaration of Conformity or further declarations of conformity can be Safety instructions ����������������������������������������������������������������������������������������8 requested at sales@ika�com� Intended use ����������������������������������������������������������������������������������������������11 Explication of warning symbols Useful information ������������������������������������������������������������������������������������ 12... -
Page 5: Safety Instructions
/// General Symbols Notice! › Set up the device in a spacious area on an even, stable, clean, non-slip, dry and fireproof A––– Position number surface� › The feet of the device must be clean and undamaged� Correct / Result! ›... -
Page 6: Intended Use
Do not use damaged components� › Only use IKA approved accessories� The safety of the user cannot be guaranteed: › Use only original IKA spare parts� › if the device is operated with accessories that are not supplied or recommended by the manufacturer�... -
Page 7: Useful Information
Useful information /// Material /// Calibration and adjustment This menu shows how the values can be entered after the respective temperatures are The inner chamber of the device is made of high quality stainless steel� The inner door is made approached and with an external measuring device cross-checked (calibrated)�... -
Page 8: Unpacking
› For lifting the device, four people are required� › You may get your hands or feet squashed when transporting and setting down the device� INC 125 F digital Hexagon socket offset screw key Wear protective gloves and safety boots�... - Page 9 Notice! When lifting the device, do not use the door / door handle� This may damage the device� /// Setting up / Fixing the device to the wall › Place the device on an even, clean, dry and fireproof surface in well-ventilated environment� ›...
- Page 10 /// Inserting the shelves › Insert the shelves › Open the door › Open the glass door /// Correctly loading...
- Page 11 /// Connecting to power Notice! The socket used must be earthed (fitted with earth contact)� Observe the ambient conditions (temperature, humidity etc�) listed under “Technical Data”� 220 - 240 V ~ 50/60 Hz 750 W IP 20 Note: Notice! › Do not place the samples directly on the floor of the inner chamber of the device� ›...
- Page 12 /// Other installation information › Fix the top device to the bottom device (Stacking two devices) › Fix the bottom device to the wall (see section "Setting up / Fixing the device to the wall") › Place the top device Caution! ›...
-
Page 13: Operator Panel And Display
Operator panel and display › Fix the top device to the wall /// Explanation of the control elements Item Designation Function Display Screen� Press it once: menu option is display Menu button Press it once again: back to working screen� Lock button Lock / unlock the settings�... -
Page 14: Operation
Operation /// Explanation of symbols on the working screen /// Switching on 5 6 7 Item Designation Function Temperature value Display the settings and actual temperature value� "Set" symbol Indicate the set value is shown on the display� Fan symbol Indicate the fan is activated�... - Page 15 /// Setting the temperature /// Setting the fan speed / the ventilation flap value › Switch between the fan and ventilation flap Min. Note:Press the multifunction key (F) to switch between the settings for the fan and the ventilation flap� The selected function blinks� Then, the value can be adjusted respectively by rotating the control knob (H)�...
- Page 16 › Adjust the fan speed value › Confirm the setting of the fan speed value and start the fan Min. Max. Note: › The fan speed can also be changed when the heating function is activated� › Higher fan speed can improve the temperature homogeneity in the chamber�...
- Page 17 › Confirm the setting of the opening of the ventilation flap › Adjust the opening of the ventilation flap Min. Max. Note: The ventilation flap value can also be changed when the heating function is activated�...
- Page 18 /// Setting Counter (C) / Timer (T) or Timer Auto (Ts) › Switch between Counter (C) / Timer (T) / Timer Auto (Ts) › Adjust and confirm the Timer (T) or Timer Auto (Ts) value...
- Page 19 /// Starting heating function Note: Counter (C): › If the "Counter (C)" function is activated, the counter automatically starts to run from 00:00:00 [h:min:sec] to the maximum value (99:23:59 [d:h:min]) when the heating is started� › If the device running time exceeds 24 hours, the time range switch from [h:min:sec] to [d:h:min] automatically�...
- Page 20 /// Locking / unlocking the settings /// Stopping heating function...
- Page 21 /// Activate standby status Menu navigation and structure /// Menu navigation › Press the menu button (B)� › Select the desired menu or sub-menu by turning the control knob to left or right and then pressing the control knob� › Press or turn the control knob again to select the desired menu option and edit the values or settings, or activate / deactivate a function�...
- Page 22 /// Menu details Alarm and key tone: In this menu option, you can select and activate key tone and alarm� Operating mode: In this menu item you can choose between three different operating modes� Mode A: All settings will be stored if the device is switched off or disconnected from the power Beep (on): Alarm and key tone is activated�...
- Page 23 Calibration and adjustment: The device is calibrated and adjusted in the factory� Individual sample loading and ambient condition might influence the temperature behaviour of the chamber� You can select and make 1-point, 2-point or 3-point calibration and adjustment as necessary� By using 3-point calibration to compensate that influence, the device can get the optimal result�...
-
Page 24: Interfaces And Outputs
First, download the latest driver for IKA devices with USB interface from: www.ika.com/ika/lws/download/usb-driver.zip. Install the driver by running the setup file� Connect the IKA device through the USB data cable to the PC� The data communication is via a virtual COM port�... - Page 25 1�1)� The NAMUR commands and the additional specific IKA commands serve only as low level commands for communication between the device and the PC� With a suitable terminal or /// Connections between device and external devices: communications programme these commands can be transmitted directly to the device�...
-
Page 26: Error Codes
› Serial number, see type plate Solutions › Contact IKA service department� › Item and designation of the spare part, see: www.ika.com, spare parts diagram and spare parts list� E10412923 › Software version (Briefly visible in the display when the device is switched on)�... -
Page 27: Technical Data
Technical data Warranty In accordance with IKA warranty conditions, the warranty period is 24 months� For claims under Operating voltage 230 ± 10 % / 115 ± 10 % / 100 ± 10 % the warranty please contact your local dealer� You may also send the machine direct to our factory,... - Page 28 Phone: +66 2059 4690 Phone: +90 216 394 43 43 Phone: +84 28 38202142 eMail: sales�lab-thailand@ika�com eMail: sales�turkey@ika�com eMail: sales�lab-vietnam@ika�com Discover and order the fascinating products of IKA online: www.ika.com IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide Technical specifications may be changed without prior notice�...
Need help?
Do you have a question about the INC 125 F digital and is the answer not in the manual?
Questions and answers