Connecting a
Stereo VCR
To connect a stereo VCR to the Concorde¥4500, you must use the
following cables:
Two 20-centimeter (8-inch) 1 RCA female to 2 RCA male
connector ÒYÓ adapter cables
One 1.9 meter (6-foot) male RCA to male RCA patch cable with
4 RCA connectors on each end
These cables can be purchased at any electronics store. Use the
following illustration as a guide when you are connecting the VCR.
To Concorde•4500
Figure E-3: Connecting a Stereo VCR
Note: Even though the sound plays back over the speakers in
the Concorde¥4500, it is not truly stereo, because the
Concorde¥4500 is a mono system.
RCA Y adapter cable
L AUDIO R
VIDEO
LINE IN
LINE OUT
RCA Y adapter cable
RCA-to-RCA patch cable
Connecting a Stereo VCR
VCR
E-5