Connecting Two Vcrs - PictureTel Concorde 4500 Servicing Manual

Connecting Two
VCRs
When two VCRs are connected, one is referred to as the Record
VCR, while the other is called the Play VCR.
To connect two VCRs to the Concorde¥4500:
1. Power down the videoconferencing system.
2. On the Record VCR, plug one of the RCA-to-RCA cables (that come
with the VCR) from the VIDEO IN connector on the VCR to the VCR
OUT connector on the Concorde•4500 Video board.
3. On the Record VCR, plug the other RCA-to-RCA cable from the
AUDIO IN connector on the VCR to the VCR OUT
on the Concorde•4500 Audio board.
4. On the Play VCR, plug one of the RCA-to-RCA cables (that come
with the VCR) from the VIDEO OUT connector on the VCR to the
VCR IN connector on the Concorde•4500 Video board.
5. On the Play VCR, plug the other RCA-to-RCA cable from the AUDIO
OUT connector on the VCR to the VCR IN
Concorde•4500 Audio board.
6. Plug the VCR power cable into the wall outlet and power up the
Concorde•4500.
Refer to the following illustration to connect the cables.

Connecting Two VCRs

connector
connector on the
E-3