Document
Camera Cable
The document camera uses a 75 ohm video coax cable, which has:
a BNC connector on the document camera end to a phono plug
RCA adapter cable (part # 510-0192-01) on the codec end, or
a YC to YC 4-pin cable (part # 510-0193-01) and a 4-pin to 8-pin
adapter cable.
This cable can be extended by Þtting bulkhead BNC sockets into the
ßoor boxes and supplying ßying leads at each end.
The following illustration shows the document camera cables.
Optional composite
peripheral cable
510-0192-01
Figure B-2: Document Camera Cables
Document Camera Cable
Optional S-video (Y/C)
peripheral cable
510-0193-01
B-3